-
Plastic Draw Latch, 300 SeriesSouthco's plastic draw latches are found on vehicles, boats, RV's boats as well as on enclosures, toolboxes and many other types of doors. This particular latch measures 3" x 1.44" x 0.38" and comes with a matching keeper. With a working load of up...
- $23.10
- $23.10
- Unit price
- per
-
Heavy Duty Spring Loaded Hinge for Lids, Covers or Doors These hinges provide spring tension to any door, lid or cap without taking up a lot of room. Even with their small (3.25 in x 2.75 in) footprint, they pack a lot of torque. Steel with yellow zinc plating, stainless steel spring, and nylon bushings...
- $16.35
- $16.35
- Unit price
- per
-
Large Size Adjustable Padlocking Draw Latch for Toolboxes and EnclosuresLooking for an exceptionally strong yet adjustable heavy duty draw latch? The 414 Series draw latch feature a welded loop that's strong and easily adjustable. There's even a padlock eye for added security! This large-sized latch has a 4" long body that's only 1.5" wide....
- From $10.35
- From $10.35
- Unit price
- per
-
413 Series Adjustable Draw LatchLooking for an insanely strong yet adjustable draw latch? The 413 Series draw latch feature a welded loop that's strong and easily adjustable. There's even a padlock eye for added security! This medium-sized latch has all the strength you need in a compact, efficient...
- From $6.04
- From $6.04
- Unit price
- per
-
K5 Link Lock KeeperKeeper plates provide a solid attachment point for Southco's K5 series Link Lock latches. Can be riveted, bolted or welded in place. Available in ZINC PLATED STEEL or STAINLESS STEEL. These keepers are designed to work with any of the K5 series latches, but...
- From $10.11
- From $10.11
- Unit price
- per
-
VL-300 Series Over Center Draw LatchDraw latches are great, but sometimes you just need more REACH. The V3 Long Blade draw latch has a long span and all of the great strength characteristics of the trusty draw latch. The integrated springs on the side of the latch body act...
- $27.13
- $27.13
- Unit price
- per
-
HTD Series Stainless Strap HingeMore sizes availableThe HTD Series hinge is a stamped, all-stainless hinge. There's a nylon bushing in the knuckles to provide smooth, silent operation. Available with square holes that are ideal for carriage bolt installation, or round holes for regular screws or bolts. Available in 80mm, 120mm...
- From $11.65
- From $11.65
- Unit price
- per
-
CH-4000 Series Draw LatchesThe CH-4000 series draw latches are a no-nonsense latch where you need to simply get the job done. No adjustment required, no fancy tools needed to install them. Keepers are not included. If you need keepers, you can find them by clicking HERE or by...
- From $2.90
- From $2.90
- Unit price
- per
-
Whale Tail LatchThe Whale Tail latch gets its name from the distinctive handle shape. We're sure it could have been called something more "scientific" but the name Megaptera Novaeangliae Tail didn't test well in focus groups. Die cast Steel, polished and Chrome Plated for maximum durability. Completely...
- $167.41
- $167.41
- Unit price
- per
-
1/4-20 Brass FiberSert Brass InsertYardley FIBER-SERT Self-Tapping Inserts are internally and externally threaded metal bushings that are installed in wood, particle board, ABS, foamed plastics and other soft materials to provide strong, permanent threads for fastening. They cut their own threads as they are driven (turned) into previously...
- From $28.74
- From $28.74
- Unit price
- per
-
Folding D-Handle LatchThese industrial door latches can be found on many truck-mounted toolboxes and industrial toolboxes. These are popular in many applications because they require little or no maintenance, they don't require any adjustment and are very rugged latching mechanisms. These latches are designed to be...
- $56.35
- $56.35
- Unit price
- per
-
E3-26-819-15 KeyThis is a tubular key from Southco, used for their specialized E3 Series Small Size panel latches. Made of stamped/machined steel with a chrome coating for protection, these keys are pretty hard to break, but not impossible to lose! Note: These keys look a...
- $18.09
- $18.09
- Unit price
- per
-
Adjustable Friction Hinge - BlackThese plastic hinges are more than just plastic hinges. The adjustment screw on the top of the hinge adjusts the tension around the pin, allowing the hinge to either move freely, or only when needed. This hinge can be used to hold a door...
- $18.09
$19.99- $18.09
- Unit price
- per
More sizes available -
Front Mount Flexible Draw LatchThe F7 Flexible Draw Latch is a strong, easy-to-use draw latch that works much like a bungee cord. With one end permanently attached, this latch never gets lost. Made of UV-resistant rubber, these are made for the great outdoors. Finger-friendly, no adjustment required, and...
- $22.79
- $22.79
- Unit price
- per
-
K5 Link Locks The K5 Link Lock, also known as a "butterfly latch", features a resilient handle for effortless manipulation. To unlatch, simply lift the wing handle and rotate it counterclockwise. This rotary-action draw latch is suitable for high-vibration environments or scenarios where strength is imperative....
- From $38.18
- From $38.18
- Unit price
- per
-
Grabber LatchSouthco's Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration, and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to ensure...
- $17.20
- $17.20
- Unit price
- per
-
97 Series Draw Latch, SteelSouthco's 97 series draw latches are strong, but are also designed for smooth function and appearance. Made of steel, and bright zinc plated for corrosion protection. Keepers are sold separately.
- $23.96
- $23.96
- Unit price
- per
-
Ludwig Snap Fastener A-17, Stainless SteelSnap Fasteners are widely used to hold signs on the sides of work trucks, specifically, the sings that say things like "dangerous goods" or "explosive materials on board".  They can be riveted or screwed onto any panel and their spring-steel construction does the rest,...
- $2.74
- $2.74
- Unit price
- per
-
Steel Piano Hinge 8ft LengthsWhen ordering a continuous hinge, you need to know a few important details:Â Overall Width (aka OPEN Width), Length, Material type and Material Thickness. These Hinges have no holes. This allows you to drill your own pattern or welded to applications. Look HERE for...
- From $31.19
- From $31.19
- Unit price
- per
-
Aluminum Piano Hinge 6ft LengthsWhen ordering a continuous hinge, you need to know a few important details:Â Overall Width (aka OPEN Width), Length, Material type and Material Thickness. These Hinges have no holes. This allows you to drill your own pattern or welded to applications. Look HERE for...
- $13.57
- $13.57
- Unit price
- per
-
Hex Head Vise Action Compression LatchNeed solid compression in a small form factor, a little security, but no special keys? This little compression latch will accommodate a thinner panel (less than 1 inch), but has a reach of 19-22.2 mm (0.75-0.87 in). The pawl is reversible, too, for additional...
- $49.22
- $49.22
- Unit price
- per
-
E3-5-15 KeyThis is a tubular key from Southco, used for their specialized E3 Series Large Size panel latches. These are often used with locks on RV's, tent trailers and sometimes tonneau covers in pickups. These keys are really sturdy and last a long time... unless...
- $18.07
- $18.07
- Unit price
- per
-
K3 Keeper PlatesKeeper plates are made for the K3 series Rotary Draw Latches, but can be used with almost any smaller-sized draw latch. These provide just the right edge for the latch to attach to, creating the perfect union between latch and lid. Available in Stainless...
- $14.21
- $14.21
- Unit price
- per
-
Prong washer for CamlocksInstalling cam locks is easy. Just drill a 3/4" hole with two flat sides on it, and.. oh, wait. You don't have a drill bit that does that? Not to worry! Just drill a3/4" hole, install the prong washer under the head of the...
- $1.14
- $1.14
- Unit price
- per
-
2601 Series SlideFor use in toolboxes, laboratory furniture, and store fixtures. Low profile with hold-in detent. Sold In Pairs Load Rating: 75 lbs. per pair! Full extension .50" [12.7 mm] side space Non-disconnect Clear zinc finish Excellent for most light-duty applications Check out our blog post...
- From $86.45
$86.45- From $86.45
- Unit price
- per
-
07 Series Draw Latch, 200 Series - WhiteThese low-tech looking latches actually have some serious engineering behind them! Made of a special plastic that flexes for thousands and thousands of cycles, these inexpensive draw latches are simple, easy to install and resistant to rust, chemicals, and the sun's UV rays. Available...
- $15.63
- $15.63
- Unit price
- per
-
Trailer Entry Door LatchIf you own an RV, motor home or cargo trailer, you've probably seen a version of this latch. Unlike many of the door latches we supply here, this one is designed to be operated from inside the door as well as the outside! Designed for...
- From $90.43
- From $90.43
- Unit price
- per
-
-
K5 Link Lock with Hex CamThe Link Lock is a sturdy, strong latch that can withstand a serious workload. These can be installed by welding them on to a metal frame or by using 3/8" or M5 screws or bolts (not supplied). With a twist of the wing head,...
- $39.85
- $39.85
- Unit price
- per
-
97 Series Over-Center Draw LatchThe photo of this latch simply doesn't do it justice. This MONSTER draw latch is large in every way. We included the specs for this one because the picture doesn't give you the proper sense of scale. The blade on this latch is over...
- $86.99
- $86.99
- Unit price
- per
-
S0417-0507 | PULLPRO WIRE LOLOAD SHEAVE, BEAR 3/16" X 2" X 1/4", 316SSThe PULLPRO LoLOAD Wire Rope Sheave, Bearing features a 440C hardened stainless steel ball bearing and can fit rope sizes ranging from 3/16 to 3/8 to ensure a perfect fit for every project. This sheave is made from grade 316 stainless steel for maximum...
- $77.72
- $77.72
- Unit price
- per
-
Steel weld-on hingesHeavy-duty steel weld-on hinge featuring a steel pin and brass washer design. The brass washer reduces friction and wear while providing smooth operation. These hinges are permanently welded to the door and frame, offering superior strength and security. Ideal for industrial doors, gates, heavy...
- From $3.91
- From $3.91
- Unit price
- per
-
HM-3000 Handle, PadlockableMedium Duty Industrial Handle, Zinc plated.
- $21.39
- $21.39
- Unit price
- per
-
K3 Link Lock draw latchThis K3 Link Lock draw latch is a rotary draw latch designed by Southco and is available in both Stainless Steel and Zinc-Plated Steel. Compact yet extremely strong, with a width of 1.5 inches across the wing, it provides excellent protection with its durable construction. Ideal...
- $23.02
- $23.02
- Unit price
- per
-
9301 series slidesWell-suited for large pantry pull-outs, vehicular storage, or other wider, heavier drawers. Extra heavy duty slide with lengths up to 60". Load Rating: up to 500 lbs. Sold in Pairs Full Extension .75 [19.1 mm] side space Non-disconnect Available in even lengths 10"-36", 40",...
- From $153.64
- From $153.64
- Unit price
- per
-
Flush-Mount Grab HandleFlush Mounded handle, steel with zinc plating. Spring loaded handle stays down and protected when not in use. Ideal for travel cases, tool boxes and other applications where a "flush" handle is needed.
- $18.50
- $18.50
- Unit price
- per
-
9015 Series Stainless Paddle LatchThis all-stainless-steel paddle latch is designed for use in rugged environments, and is built to last! They can be used indoors or out, and never require any adjustment. If you need access from the inside of the compartment or enclosure, there's a threaded hole...
- $28.50
- $28.50
- Unit price
- per
-
Weld Nut Retainer Weld Nut Zinc Plated, 3/8-16 Screw Size, 2 in Base LengthEver try to hold a nut in place to fasten a door or lid down, but then also have to hold it with a wrench, all while aiming for that nut with the matching bolt while reaching around body panels and through a maze...
- $2.06
- $2.06
- Unit price
- per
-
Southco Oval Head Quarter-Turn StudDzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Stainless Steel Passivated
- $3.54
- $3.54
- Unit price
- per
-
Miniature Adjustable Grip LatchThis adjustable grip latch provides infinite adjustment, but without tools whatsoever! It operates like a screw, just turn clockwise to tighten, counter-clockwise to loosen. When opening, the cam backs away from the frame of your door, then swings out of the way, allowing the...
- $59.25
$27.99- $59.25
- Unit price
- per
-
9308 Series Heavy Duty Slide, Lock in/out, Right HandLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $101.00
$97.58- From $101.00
- Unit price
- per
-
9308 Series Heavy Duty Slide, Lock in/out, Left HandLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $101.00
$97.58- From $101.00
- Unit price
- per
-
EH-5A-4G4-50 | Surface Mount Hinge, 40mm (1.57 in) size, with Mounting Studs, Zinc Alloy, Powder Coated, BlackSurface Mount Hinge, 40 mm (1.57 in) size, with Mounting Studs, Zinc Alloy, Powder Coated, Black
- $28.71
- $28.71
- Unit price
- per
-
-
-
64-01-10Push-to-Close Latch, Miniature Size, Stainless Steel, Brushed Finish.
- $40.53
- $40.53
- Unit price
- per
-
S3832-0002 | HD WIDE STRAP HINGE 6", 316 SSThe Heavy Duty Wide Strap Hinge is designed to fold completely in half. This strap hinge is ideal for tables, doors and other applications where recessed hinges allow for a totally flat surface. It is made from grade 316 stainless steel for corrosion resistance.
- $46.55
- $46.55
- Unit price
- per
-
S0417-0710 | PULLPRO WIRE LOLOAD SHEAVE, BEAR 1/4"X2-1/2"X3/8", 316 SSThe PULLPRO LoLOAD Wire Rope Sheave, Bearing features a 440C hardened stainless steel ball bearing and can fit rope sizes ranging from 3/16 to 3/8 to ensure a perfect fit for every project. This sheave is made from grade 316 stainless steel for maximum...
- $99.73
- $99.73
- Unit price
- per
-
S3710-0032 | STAMPED PAD EYE 1-1/8", 304 SSThe Pad Eye is ideal for marine, industrial, architectural, OEM and government applications. This pad eye is made from grade 304 stainless steel for maximum corrosion resistance and durability. The size is the maximum inside diameter.
- $17.53
- $17.53
- Unit price
- per
-
P0101-BD08 | TURNBUCKLE BODY CLOSED, 5/16" 316 SSThis closed body turnbuckle is available with UNC or UNF threads and is available in sizes ranging from 3/16 to 5/8. It is made from grade 316 stainless steel for maximum corrosion resistance and durability. There is a hole in the body for easy...
- $28.50
- $28.50
- Unit price
- per
- Choosing a selection results in a full page refresh.