-
Prong washer for CamlocksInstalling cam locks is easy. Just drill a 3/4" hole with two flat sides on it, and.. oh, wait. You don't have a drill bit that does that? Not to worry! Just drill a3/4" hole, install the prong washer under the head of the...
- $1.14
- $1.14
- Unit price
- per
-
97 Series Draw Latch, SteelSouthco's 97 series draw latches are strong, but are also designed for smooth function and appearance. Made of steel, and bright zinc plated for corrosion protection. Keepers are sold separately.
- $23.96
- $23.96
- Unit price
- per
-
2601 Series SlideFor use in toolboxes, laboratory furniture, and store fixtures. Low profile with hold-in detent. Sold In Pairs Load Rating: 75 lbs. per pair! Full extension .50" [12.7 mm] side space Non-disconnect Clear zinc finish Excellent for most light-duty applications Check out our blog post...
- From $86.45
$86.45- From $86.45
- Unit price
- per
-
Aluminum Piano Hinge 6ft LengthsWhen ordering a continuous hinge, you need to know a few important details:Â Overall Width (aka OPEN Width), Length, Material type and Material Thickness. These Hinges have no holes. This allows you to drill your own pattern or welded to applications. Look HERE for...
- From $4.79
$13.65- From $4.79
- Unit price
- per
-
HM-3000 Handle, PadlockableMedium Duty Industrial Handle, Zinc plated.
- $21.39
- $21.39
- Unit price
- per
-
K3 Link Lock draw latchThis K3 Link Lock draw latch is a rotary draw latch designed by Southco and is available in both Stainless Steel and Zinc-Plated Steel. Compact yet extremely strong, with a width of 1.5 inches across the wing, it provides excellent protection with its durable construction. Ideal...
- $23.02
- $23.02
- Unit price
- per
-
Versa Latch Keeper (V2-0018-07)This keeper plate was made for the Versa Latch (V2) series draw latch. While it's possible to use the VL-200 without this keeper, sometimes it just makes life easier. You'll need to bring your own screws/rivets/bolts to the party, because they're not included.
- $7.16
- $7.16
- Unit price
- per
-
Weld Nut Retainer Weld Nut Zinc Plated, 3/8-16 Screw Size, 2 in Base LengthEver try to hold a nut in place to fasten a door or lid down, but then also have to hold it with a wrench, all while aiming for that nut with the matching bolt while reaching around body panels and through a maze...
- $2.06
- $2.06
- Unit price
- per
-
Southco Oval Head Quarter-Turn StudDzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Stainless Steel Passivated
- $3.54
- $3.54
- Unit price
- per
-
Miniature Adjustable Grip LatchThis adjustable grip latch provides infinite adjustment, but without tools whatsoever! It operates like a screw, just turn clockwise to tighten, counter-clockwise to loosen. When opening, the cam backs away from the frame of your door, then swings out of the way, allowing the...
- $59.25
$27.99- $59.25
- Unit price
- per
-
9308 Series Heavy Duty Slide, Lock in/out, Right HandLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $101.00
$97.58- From $101.00
- Unit price
- per
-
9308 Series Heavy Duty Slide, Lock in/out, Left HandLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $101.00
$97.58- From $101.00
- Unit price
- per
-
07 Series Draw Latch, 200 Series - WhiteThese low-tech looking latches actually have some serious engineering behind them! Made of a special plastic that flexes for thousands and thousands of cycles, these inexpensive draw latches are simple, easy to install and resistant to rust, chemicals, and the sun's UV rays. Available...
- $15.63
- $15.63
- Unit price
- per
-
64-01-10Push-to-Close Latch, Miniature Size, Stainless Steel, Brushed Finish.
- $40.53
- $40.53
- Unit price
- per
-
S3832-0002 | HD WIDE STRAP HINGE 6", 316 SSThe Heavy Duty Wide Strap Hinge is designed to fold completely in half. This strap hinge is ideal for tables, doors and other applications where recessed hinges allow for a totally flat surface. It is made from grade 316 stainless steel for corrosion resistance.
- $46.55
- $46.55
- Unit price
- per
-
R4-05-50-9EK1-20 | Electronic Rotary Push-to-Close, Pull-to-Open LatchLatch
- $136.56
- $136.56
- Unit price
- per
-
97 Series Over-Center Draw LatchThe photo of this latch simply doesn't do it justice. This MONSTER draw latch is large in every way. We included the specs for this one because the picture doesn't give you the proper sense of scale. The blade on this latch is over...
- $86.99
- $86.99
- Unit price
- per
-
C6-221 | Positioning Hinge, 80°, Stainless Steel Detent Tube, Natural, BlackPositioning Hinge, 80°, Stainless Steel Detent Tube, Natural, Black
- $41.45
- $41.45
- Unit price
- per
-
EH-7B-6V6-20 | Surface Mount Hinge, 65mm size, with Mounting Holes, Nylon, BlackSurface Mount Hinge, 65mm size, with Mounting Holes, Nylon, Black
- $23.86
- $23.86
- Unit price
- per
-
Hex Cap Screw Covers (100/pkg)More sizes availableThese black polyethylene covers are designed to dress up any exposed hex bolts. Not only that, they remove the potential for snags and other injuries by providing a smooth, rounded cover! To install, just press them over the head of the appropriately-sized hex bolt....
- $8.92
- $8.92
- Unit price
- per
- Choosing a selection results in a full page refresh.