-
#82 Wing Head 1/4 Turn StudOne of Southco's longest running products, the Lion (R) quarter-turn stud is easy to use, easy to install and requires no adjustment. It does, however, require some precise calculation, the right receptacle, and a retainer. If you're not sure which part number(s)you need to...
- $18.90
- $18.90
- Unit price
- per
-
82 Series Quarter Turn Stud, ZincOne of Southco's longest running products, the Lion quarter-turn stud is easy to use, easy to install, and requires no adjustment. It does, however, require some precise calculation, the right receptacle and a retainer. If you're not sure which partnumber(s)you need to make a...
- $8.99
- $8.99
- Unit price
- per
-
82 Series Dzus Quarter Turn StudSouthco's DZUS quarter-turn fasteners have been around for almost 100 years. They're strong, easy to install, and resist vibration. This is only part of the quarter-turn system, though! A complete system requires a Stud, Receptacle and Retainer, so unless you're replacing one component, please...
- $2.14
- $2.14
- Unit price
- per
-
Southco Oval Slot Quarter-Turn StudDzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Stainless Steel Passivated
- $2.14
- $2.14
- Unit price
- per
-
Oval Slotted Stud, SSDzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Stainless Steel Passivated
- $2.14
- $2.14
- Unit price
- per
-
Southco Oval Head Quarter-Turn Stud, SteelDzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Steel Zinc Plate, Bright chromate
- $1.47
- $1.47
- Unit price
- per
-
82 Series Quarter Turn Dzus StudSouthco's DZUS quarter-turn fasteners have been around for almost 100 years. They're strong, easy to install, and resist vibration. This is only part of the quarter-turn system, though! A complete system requires a Stud, Receptacle and Retainer, so unless you're replacing one component, please...
- $1.47
- $1.47
- Unit price
- per
-
81 Series Wear Washer, Black nylonThis nylon "cup-style" washer is designed for use with Southco's 81 series Dzus quarter-turn fasteners. It fits neatly under the head of the stud and prevents scuffing or scratching on the panel. Available in black! Also, black. Sold in packagesof 100.
- $2.99
- $2.99
- Unit price
- per
-
81 Series Ejector Spring, Stainless SteelThe 81 Series ejector spring is designed for use with Southco's Dzus Quarter-Turn fasteners (with part numbers that begin with "81"). These are used to pop the stud to the fully extended position when not latched, so it's clear to see when the stud...
- $2.99
- $2.99
- Unit price
- per
-
Nylon Push-On RetainerSouthco's #81 series push-on retainers are designed for use with their #81 seriesDzusquarter-turn fasteners. Retainers ensure that the studs stay attached to the panel and never get lost. Sold in packages of 100.
- $1.72
- $1.72
- Unit price
- per
-
-
#81 Series Wing-Head Quarter Turn StudOne of Southco's longest running products, the Lion (R) quarter-turn stud is easy to use, easy to install, and requires no adjustment. It does, however, require some precise calculation, the right receptacle and a retainer. If you're not sure which partnumber(s)you need to make...
- $6.99
- $6.99
- Unit price
- per
-
Poly Drive Rivet, NaturalPoly Rivets are one-piece nylon blind rivets that offer a fast, economical, permanent, hand installed fastener that can be used in a wide variety of materials including sheet metal, plastic sheets, fiberglass, P.C. boards, and composition materials. Fast, easy installation can be made without...
- $6.99
- $6.99
- Unit price
- per
-
1/4" x 29/32" Countersunk Aluminum Drive RivetThese all-aluminum 2-piece rivets are ideal for any blind application into (or through) solid materials like wood, metal panels, masonry and much more. These rivets have a nominal grip of 3/4", but will hold materials with a total thickness of .703" to .796". These...
- $6.99
- $6.99
- Unit price
- per
-
-
3/8" Aluminum 2-pc Drive RivetAluminum Drive Rivets are handy for blind applications (where you don't have easy access behind the panels you're fastening). Blind applications would be places like attaching a sign to a brick wall hanging panels on a wall attaching signs to tubular posts To install,...
- $9.99
- $9.99
- Unit price
- per
-
DLP Series Printed Circuit Board SupportsDesigned to provide a fixed space between two printed circuit boards (or any kind of thin panel), the DLP Series spacer is designed to be strong but lightweight and compact. Both ends snap firmly into a 0.187" diameter hole, in a panel that is...
- $9.25
- $9.25
- Unit price
- per
-
DLP Series Printed Circuit Board SupportsIf you're working on an Arduino or Raspberry Pi project and need to hold your main board in place, this will help a lot! PCB supports require only a round hole and a little pressure to install. These are 0.745" long and the end...
- From $12.99
- From $12.99
- Unit price
- per
-
Nylon Flat Washer, 3/8 in IDNylon Flat Washer, natural white, 5/8" OD X .380" ID X .062" thick. Sold in bags of 100pcs only.
- $4.99
- $4.99
- Unit price
- per
-
Nylon Flat Washer, 0.140" ID x .312" ODNylon FLAT WASHER .312" Outside Diameter X .140" Inside Diameter X .093" thickness Sold in packages of 100 pcs
- $4.99
- $4.99
- Unit price
- per
-
#6 Nylon SpacerTough and resilient, nylon spacers are useful for many applications, even outdoor ones! They are ideal for use in electrical and electronic assemblies. They also can be used as bushings, bearing, rollers, and glides. Molded from corrosion resistant Type 6/6 Nylon. Inside Diameter: 0.140...
- From $4.99
- From $4.99
- Unit price
- per
-
5/16" Nylon SpacerNylon Spacer, natural type 6/6 nylon. .375" Outer diameter x .140" Inner diameter x 5/16" long. Prepackaged in 100 per bag. Also, stackable!
- $3.99
- $3.99
- Unit price
- per
-
-
#12 Slot Head Quick-Opening Captive ScrewThese medium-sized Southco captive screws have a special ACME thread for maximum vibration resistance and strength. Designed to be quick to operate yet super strong, these screws have enormous strength for their size. These screws will only work with a similarly threaded nut, or...
- $2.60
- $2.60
- Unit price
- per
-
#12 Quick Opening Captive Screw ReceptacleMade for use with Southco's #12 series quick opening captive screws, these receptacles simply clip on to the edge of your frame, with no adjustment required. Will work with any Southco #12 series quick-opening captive screws.
- $0.76
- $0.76
- Unit price
- per
-
12 Series Clip-On Receptacle, Stainless SteelDesigned for use with Southco's 12 series quick-opening captive screws, these receptacles just clip to the edge of your frame. These receptacles are specifically designed to work with an ACME threaded screw, like Southco's #12 series screws. These will not work with standard threaded...
- $12.99
- $12.99
- Unit price
- per
-
Nylon Lock Nut, 1/4-20 threads1/4-20 Nylon Lock Nut, Type 6/6 nylon, natural white color. F=0.425",H=.275" Sold in bags of 1,000 pcs.
- $79.99
- $79.99
- Unit price
- per
-
Nylon Hex Nut, 1/2-13Nylon Hex nuts, 1/2"-13 thread. White natural color. Sold in bags of 1,000 pcs.
- $149.00
- $149.00
- Unit price
- per
-
Nylon Hex Bolt 1/4-20 x 1Need a hex bolt, but don't want a metal one? Nylon hex bolts are great for outdoor applications. Available in "natural" off-white color only, and sold in multiples of 100 pcs only. 1/4-20 threads x 1" long, and they even have a slotted head....
- $4.75
- $4.75
- Unit price
- per
-
Nylon Hex Bolt 1/4-20 x 3/4Need a hex bolt, but don't want a metal one? Nylon hex bolts are great for outdoor applications. Available in "natural" off-white color only. 1/4-20 threads x 3/4" long. Available in bags of 100 or 1000 pcs.
- From $4.75
- From $4.75
- Unit price
- per