Push-to-Close Slide Latch, Snap-in, Medium Size, for 1.6mm (.060 in) Panel Thickness and 6.4mm (.250 in) Total Grip.  Made of ABS, Black.

Small Series Cam Latch, Cup Style, Black finish. Turn this latch counter-clockwise to latch, so that when the latch is in the locked position, the latch handle is perpendicular to the edge of the door. This latch has a grip range of 0" to...

Small Series Cam Latch, Cup Style, Black finish. This latch turns counter-clockwise to latch, and when the latch is in the locked position, the latch handle is parallel to the edge of the door. This latch has a grip range of 0" to 1/2"...

Southco's Snap-In Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to...

Southco M1-44 Low Profile, Medium Series Flush Pull Latch, Black, Locking.  Designed for Grip Range of 25mm-26mm and a Panel Thickness of 17mm-22mm.   Mounting bracket and screws are included.

Dzus® Lion Quarter-Turn Stud, Medium Size, Phillips, Flush, Steel Zinc Plate, Bright chromate

Dzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Steel Zinc Plate, Bright chromate

One of Southco's longest-running products, the Lion (R) quarter-turn stud is easy to use, easy to install and requires no adjustment. It does, however, require some precise calculation, the right receptacle, and a retainer. If you're not sure which part number(s)you need to make...

Dzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Stainless Steel Passivated

Dzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Stainless Steel Passivated

Dzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Steel Zinc Plate, Bright chromate

Dzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Stainless Steel Passivated

Dzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Steel Zinc Plate, Bright chromate

This specialized installation tool is designed for easy installation of Southco's #85 series DZUS quarter-turn retainers. Place the retainer over the end of the stud, press firmly with the installation tool, and that's it! This specific tool isn't critical to the installation process, but...

The Southco V2 Series is a compact, spring-loaded draw latch built for enclosures, panels, toolboxes, and equipment doors that need a secure, low-profile pull-up latch. It is a good fit when you need positive closure on a hinged door or panel without the bulk...

The keeper (striker) is the receiving half of a Southco V2 Series draw latch. It mounts to the frame or sill opposite the latch body and is what the latch blade pulls up against to hold the door or panel closed.Available in stainless steel...

The K3 Link Lock, also known as a "butterfly latch" has a small form factor, but holds a surprising amount of strength. Measuring only 1.5" across the wing, this compact little latch is great on smaller lids or cases.This version of the Link Lock...

Southco's E3 Vise Action compression latches are like a door latch and a clamp all in one!  TheSouthco E3'snot only hold a compartment door closed, they clamp it closed with up to 4mm of compression, with a simple 180 degree turn of the wing handle....

These rotary cam latches have an insanely high tensile load rating, and are great for attaching panels together end-to-end. They can be mortised in or attached to the side of a panel, whichever works best for you. With an average load rating of 1400...

This T-Bar handle latch is comfortable for gloved hands (for winter use) and strong enough for the most demanding environments. All of the necessary mounting hardware is included, and all you need is three round holes. Why three? This prevents the latch from spinning...

Push-to-Close Latch, Plastic, White

Slide Latch, Steel, Zinc Plate, Bright Chromate