-
Vendor: Steeves AgenciesLooking for an exceptionally strong yet adjustable heavy duty draw latch? The 414 Series draw latch feature a welded loop that's strong and easily adjustable. There's even a padlock eye for added security! This large-sized latch has a 4" long body that's only 1.5" wide....
- From $9.00
- From $9.00
- Unit price
- per
-
Vendor: SouthcoDraw latches are great, but sometimes you just need more REACH. The V3 Long Blade draw latch has a long span and all of the great strength characteristics of the trusty draw latch. The integrated springs on the side of the latch body act...
- $8.30
- $8.30
- Unit price
- per
-
Vendor: SouthcoKeeper plates provide a solid attachment point for Southco's K5 series Link Lock latches. Can be riveted, bolted or welded in place. Available in STEEL or STAINLESS. These keepers are designed to work with any of the K5 series latches, but can be adapted...
- From $5.53
- From $5.53
- Unit price
- per
-
Vendor: SouthcoThe F7 Flexible Draw Latch is a strong, easy-to-use draw latch that works much like a bungee cord. With one end permanently attached, this latch never gets lost. Made of UV-resistant rubber, these are made for the great outdoors. Finger-friendly, no adjustment required, and...
- $15.84
- $15.84
- Unit price
- per
-
Vendor: SouthcoThese plastic hinges are more than just plastic hinges. The adjustment screw on the top of the hinge adjusts the tension around the pin, allowing the hinge to either move freely, or only when needed. This hinge can be used to hold a door...
- $15.73
$19.99- $15.73
- Unit price
- per
-
Vendor: RyadonThe 700 Series RV Vent is a great way to provide air flow inside a compartment, trailer or enclosure. Made of aluminum with a plastic center handle for easy opening and closing (in TWO directions, by the way), this vent is easy to install...
- $29.99
- $29.99
- Unit price
- per
-
Vendor: SouthcoThis is a tubular key from Southco, used for their specialized E3 Series Small Size panel latches. Made of stamped/machined steel with a chrome coating for protection, these keys are pretty hard to break, but not impossible to lose! Note: These keys look a...
- $15.73
- $15.73
- Unit price
- per
-
Vendor: SouthcoSouthco's Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration, and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to ensure...
- $12.21
- $12.21
- Unit price
- per
-
Vendor: SouthcoThis is a tubular key from Southco, used for their specialized E3 Series Large Size panel latches. These are often used with locks on RV's, tent trailers and sometimes tonneau covers in pickups. These keys are really sturdy and last a long time... unless...
- $15.71
- $15.71
- Unit price
- per
-
Vendor: SouthcoThe K5 Link Lock, also known as a "butterfly latch", features a resilient handle for effortless manipulation. To unlatch, simply lift the wing handle and rotate it counterclockwise. This rotary-action draw latch is suitable for high-vibration environments or scenarios where strength is imperative....
- From $26.97
- From $26.97
- Unit price
- per
-
Vendor: SouthcoSouthco's Snap-In Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to...
- $12.29
- $12.29
- Unit price
- per
-
Vendor: Steeves AgenciesLooking for an insanely strong yet adjustable draw latch? The 413 Series draw latch feature a welded loop that's strong and easily adjustable. There's even a padlock eye for added security! This medium-sized latch has all the strength you need in a compact, efficient...
- From $5.25
- From $5.25
- Unit price
- per
-
Vendor: SouthcoMade by Mobella, this Cabin swing door set is made for marine cabin doors. Comes complete with all the hardware to install it. This version of the Cabin door latch has these options: Left-Out Swing option Privacy locking Made for 22-30mm door thickness Nova...
- $259.46
$171.74- $259.46
- Unit price
- per
-
Vendor: SouthcoThe Link Lock is a sturdy latch that can withstand a serious workload. These can be installed by welding them on to a metal frame or by using 3/8" or M5 screws or bolts (not supplied). With a twist of the wing head, this...
- $31.01
- $31.01
- Unit price
- per
-
Vendor: SouthcoThe Link Lock is a sturdy, strong latch that can withstand a serious workload. These can be installed by welding them on to a metal frame or by using 3/8" or M5 screws or bolts (not supplied). With a twist of the wing head,...
- $29.16
- $29.16
- Unit price
- per
-
Vendor: Eberhard HardwareThe Whale Tail latch gets its name from the distinctive handle shape. We're sure it could have been called something more "scientific" but the name Megaptera Novaeangliae Tail didn't test well in focus groups. Die cast Steel, polished and Chrome Plated for maximum durability. Completely...
- $145.57
- $145.57
- Unit price
- per
-
Vendor: RyadonThe CL-1150 toolbox latch is a lockable Stainless Steel paddle latch. Our latches typically come keyed alike so that you only need one key even if you're using multiple locks on your cabinet or toolbox, but if you need a particular hgey, You may...
- $15.95
- $15.95
- Unit price
- per
-
Vendor: AccurideLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $87.82
$97.58- From $87.82
- Unit price
- per
-
Vendor: AccurideLock-out feature secures drawers in an open position for extended access. Suitable for equipment drawers, trays, or shelves. Heavy-duty lock-in and lock-out with front latch release. Not sold in pairs. To make a pair you must also order the corresponding length of 9308 Series...
- From $87.82
$97.58- From $87.82
- Unit price
- per
-
Vendor: SouthcoThese low-tech looking latches actually have some serious engineering behind them! Made of a special plastic that flexes for thousands and thousands of cycles, these inexpensive draw latches are simple, easy to install and resistant to rust, chemicals, and the sun's UV rays. Available...
- $13.59
- $13.59
- Unit price
- per
-
Vendor: SouthcoThis K3 Link Lock draw latch is a rotary draw latch designed by Southco and is available in both Stainless Steel and Zinc-Plated Steel. Compact yet extremely strong, with a width of 1.5 inches across the wing, it provides excellent protection with its durable construction. Ideal...
- $20.01
- $20.01
- Unit price
- per
-
Vendor: SouthcoThese plastic hinges are more than just plastic hinges. The adjustment screw on the top of the hinge adjusts the tension around the pin, allowing the hinge to either move freely, or only when needed. This hinge can be used to hold a door...
- $15.73
$19.99- $15.73
- Unit price
- per
-
Vendor: SouthcoThe Link Lock is a sturdy latch that can withstand a serious workload. These can be installed by welding them on to a metal frame or by using 3/8" or M5 screws or bolts (not supplied). With a twist of the wing head, this...
- From $29.16
- From $29.16
- Unit price
- per
-
Vendor: Steeves AgenciesSimple is beautiful! This 13 inch long stainless grab handle is both low-tech and awesome. And shiny. Made from 1/2 inch Type 304 Stainless bar stock, these handles will weather any condition, indoors and out. Mounting holes are countersunk and drilled for 1/4" flat...
- $15.77
- $15.77
- Unit price
- per
-
Vendor: SouthcoSouthco M1-44 Low Profile, Medium Series Flush Pull Latch, Black, Locking. Designed for Grip Range of 25mm-26mm and a Panel Thickness of 17mm-22mm. Mounting bracket and screws are included.
- $44.01
- $44.01
- Unit price
- per
-
Vendor: SouthcoThis version of the Link Lock incorporates a pad-locking eye in the keeper for added security. Another great feature is the springs that connect the latch to the base plate. This spring acts as a shock absorber and provides a little extra forgiveness in...
- $18.99
- $18.99
- Unit price
- per
-
Vendor: SouthcoBased on the Southco #2 Link Lock latch, this adaptation allows you to secure the latch with a padlock. The staple is part of the keeper plate, so the latch and keeper need to be sold together. Steel latch with zinc plating for corrosion...
- $18.99
- $18.99
- Unit price
- per
-
Vendor: SouthcoSouthco's C6 series of hinges do some cool tricks: they hold a door closed and can hold it in an open position! This one holds the door firmly closed, and also snaps into position at 115 degrees open. Comes with screw head covers for...
- $36.36
- $36.36
- Unit price
- per
-
Vendor: SouthcoMuch like the other Small-Sized #37 draw latches, this latch is just under 3" when latched. Most notably, the keeper on this latch is the "R" Style keeper, effectively giving you a little more "reach" when installing the keeper. Made of space-age polymer material...
- $25.05
- $25.05
- Unit price
- per
-
Vendor: SouthcoThe Versa Latch has been around for years. These compact little latches are much stronger than they look, and despite their "spartan" appearance, they're very easy to install and use. The coil springs you see are there to compensate for misaligned panels, and can...
- $5.99
$15.97- $5.99
- Unit price
- per