-
Vendor: Suncor StainlessThis eye nut is made from grade 316 stainless steel for maximum corrosion resistance and durability, making it perfect for marine and industrial applications. Threaded section is 1" in diameter, and the ring has a 1.95" I.D. 7,500 lb working load capacity!
- $54.99
- $54.99
- Unit price
- per
-
Vendor: Suncor StainlessThis 5/16" Eye Nut is UNC thread, with other sizes available (ranging from 1/4" to 1"),to fit every project. This eye nut is made from grade 316 stainless steel for maximum corrosion resistance and durability, making it perfect for marine and industrial applications.
- $3.99
- $3.99
- Unit price
- per
-
Vendor: Eberhard HardwareThe 5624 series handle is a long-time favorite of manufacturers of metal enclosures around the world.It'sa very basic and robust L-handle with a built-in padlocking hasp for security. This handle has a 4 1/2" long 5/16" square shaft for actuating a number of possible...
- $37.99
- $37.99
- Unit price
- per
-
-
Vendor: Suncor StainlessThe Chain Shackle Body is unthreaded and marked to the nearest fractional ton. It is made from grade 316 stainless steel. It can be used as a replacement part and is compatible with the Shackle Bolt. PART NO. A(SIZE) B C D WLL(LB) WT(LB)...
- $12.82
- $12.82
- Unit price
- per
-
Vendor: Suncor StainlessThe Chain Shackle Body is unthreaded and marked to the nearest fractional ton. It is made from grade 316 stainless steel and available in a variety of sizes from 1/4Ì_ÌÇ__Ì_ÌÇ__Ì_ÌÇ_?Ì_ÌÇ_Ì_ÌÇ_۪Ìâ? to 1Ì_ÌÇ__Ì_ÌÇ__Ì_ÌÇ_?Ì_ÌÇ_Ì_ÌÇ_۪Ìâ?. It can be used as a replacement part and is compatible with...
- $115.73
- $115.73
- Unit price
- per
-
Vendor: SouthcoAluminum Handle, black matte powder coated with 8-32 threaded mounting holes. This handle has an almost 5" inside grip, and is 1 1/2" tall, providing generous grip area for hands, even with gloves! Mounting holes are exactly 5" apart.
- $17.91
- $17.91
- Unit price
- per
-
Vendor: Steeves AgenciesThese simple yet rugged handles are made of solid 1/2" diameter aluminum stock. Measuring 13 inches long in total, they provide a generous grip area, even if you're wearing mitts or gloves. Mounting hardware not included.
- $10.22
- $10.22
- Unit price
- per
-
Vendor: Carey ManufacturingMade by Carey Mfg, this basic 1/4" diameter aluminum handle is ideal for light weight applications where a small profile is required. While these handles aren't big, they're still very strong and can handle a serious amount of use. 2.5" from hole to hole,...
- $5.95
- $5.95
- Unit price
- per
-
Vendor: SouthcoThe Southco B4 pulls are fancy! These industrial grade aluminum pulls come ina Clear Anodized finish.They even look good enough to put in your kitchen! With threaded holes for 8-32 screws (not included), these pull can be installed in minutes, but will last for...
- $24.34
- $24.34
- Unit price
- per
-
Vendor: SouthcoThe Southco B4 pulls are lightweight, but incredibly strong. With threaded holes for 8-32 screws (not included) these handles can be installed quickly, but will last for a long, long time.
- $25.88
- $25.88
- Unit price
- per
-
Vendor: SouthcoSouthco Pull, Large series, Clear anodized finish. Need we say more?
- $24.94
- $24.94
- Unit price
- per
-
Vendor: SouthcoGrab Handle, rear mount. Easy to install, and sure easy to look at!
- $25.83
- $25.83
- Unit price
- per
-
Vendor: SouthcoGrab Handle, Front Mount. Made of ABS plastic, these handles come "unassembled" as shown. Just drill your holes (using the handle as your template!), install your mounting bolts, and snap the trim cover into place. VOILA!
- $11.71
- $11.71
- Unit price
- per
-
Vendor: SouthcoABS Grab Handles from Southco. Front Mount, comes with a snap-in cover to hide the mounting hardware (mounting hardware not supplied).
- $24.79
- $24.79
- Unit price
- per
-
Vendor: SouthcoFor once, the hardware is included! This handle is molded out of the finest ABS material, and shaped to fit your hand (even in mitts!) very comfortably. Large enough for even the largest of hands, this handle is stylish and available in jet black.
- $16.93
- $16.93
- Unit price
- per
-
Vendor: Eberhard HardwareInside Handle, die cast steel with Zinc plating. Fits a standard 5/16" shaft, and has a set screw for securing it in place.
- $21.33
- $21.33
- Unit price
- per
-
Vendor: SouthcoStainless Steel industrial handle, with padlock eye for maximum security. All Stainless construction. Bolt or weld-on to install. Mounting hardware is not included.
- $28.49
- $28.49
- Unit price
- per
-
Vendor: Sierra PacificFlush Mounded handle, steel with zinc plating. Spring loaded handle stays down and protected when not in use. Ideal for travel cases, tool boxes and other applications where a "flush" handle is needed.
- $3.64
- $3.64
- Unit price
- per
-
Vendor: Green Bay Drop ForgeForged T-Bolts are often used in tank straps, which hold fuel tanks in place on many buses and other industrial vehicles. T-Bolts are forged for superior strength, and machined for precise threads. Don't be fooled by their rugged looks, they're strong and durable, ready...
- $5.80
- $5.80
- Unit price
- per
-
Vendor: SouthcoVery basid L-Handle actuator. 1 1/2" mounting hole spacing. Die-case zinc with a chrome finish for nice looks and long life. Comes with two keys.
- $9.56
- $9.56
- Unit price
- per
-
Vendor: SouthcoSurface mount Handle. Steel with Zinc plating and Rubber Grip for comfort. Spring loaded to stay down when not in use.
- $7.55
- $7.55
- Unit price
- per
-
Vendor: Green Bay Drop ForgeThese forged steel eye bolts are designed for heavy lifting. They have a safe working load capacity of up to 2,800 lbs and a mininum breaking load of 5,000 lbs! These have a 1 inch ID in the eye, and a 3/8-16 threaded shaft.
- $5.49
- $5.49
- Unit price
- per
-
Vendor: RyadonThe HM-3000 is a very basic and robust L-handle with a built-in padlocking hasp for security. This handle has a 4 1/2" long 5/16" square shaft for actuating a number of possible single or multi-point latches. This is a forged steel handle with a...
- $20.75
- $20.75
- Unit price
- per
-
Vendor: SouthcoMedium Duty Industrial Handle, Zinc plated.
- $18.60
- $18.60
- Unit price
- per
-
Vendor: Hinges & LatchesMedium Duty Padlock handle, all stainless steel, with 3 threaded mounting studs, 5/16" threaded shaft. Use this handle with any double or triple-point latching mechanism that accepts a 5/16" square shaft. You can also use a simple (single) pawl for a one-point latching system.
- $39.54
- $39.54
- Unit price
- per
-
Vendor: SouthcoThe P1 Pocket Pull Flush Handle is a 2-piece handle that installs in minutes. It requires a small cutout, but once installed, is a strong, self-contained handle pocket. Mounting screws are included!
- $11.33
- $11.33
- Unit price
- per
-
Vendor: SouthcoThe P1 Pocket Pull Flush Handle is a 2-piece handle that installs in minutes. It requires a small cutout, but once installed, is a strong, self-contained handle pocket. Mounting screws are included!
- $15.40
- $15.40
- Unit price
- per