-
Wing Head Cam Lock, ChromeThis CM Series Cam Lock body has awing head for easy actuation without keys. Ideal where security isn't a big concern, but where a positive locking, easy to use latch is needed. The lock body includes all the components necessary for installation, except the...
- $4.38
- $4.38
- Unit price
- per
-
Wing Head Cam LockThis cam lock fits the same size hole as the other CM series cam locks, but has a wing head, so you can operate it without a key. Cams sold separately, but this lock body comes with all the parts you need for installation....
- $4.85
- $4.85
- Unit price
- per
-
VL-300 Series Over Center Draw LatchDraw latches are great, but sometimes you just need more REACH. The V3 Long Blade draw latch has a long span and all of the great strength characteristics of the trusty draw latch. The integrated springs on the side of the latch body act...
- $8.30
- $8.30
- Unit price
- per
-
VL-200 Keeper W/.218 HolesWhat makes this particular keeper handy is that it has the same size holes as the Versa Latch (V2-0025-XX or V2-0026-XX).
- From $3.16
- From $3.16
- Unit price
- per
-
Vise-Action Knob Style Compression Latch, BlackVise-Action compression latches compress up to 4mm with just a single turn of the wing knob! This version is available in black and requires only a single 13.5mm diameter hole to install. Manufacturer's Part Number E3-57-55
- $38.77
- $38.77
- Unit price
- per
-
Vise-Act Key Op. Latch BlkSouthco's E3 series compression latches provide security AND good looks! They compress the door to prevent vibration, and with tool-access, a measure of security from accidental opening. Black powder-coated finish provides a durable weather-resistant finish. This latch is specifically suited to a door thickness of 2mm...
- $38.77
- $38.77
- Unit price
- per
-
Versa-Latch Pad-Lockable Draw LatchNeed security and strength? You can have the best of both! These super-strong draw latches are easy to install. They're also very forgiving! The integral springs allow the latch to close even if your panels aren't perfectly aligned.
- $16.70
- $16.70
- Unit price
- per
-
Versa Latch Over-Center draw latchThe Versa Latch has been around for years. These compact little latches are much stronger than they look, and despite their "spartan" appearance, they're very easy to install and use. The coil springs you see are there to compensate for misaligned panels, and can...
- $5.99
$15.97- $5.99
- Unit price
- per
-
Versa Latch Keeper (V2-0018-07)This keeper plate was made for the Versa Latch (V2) series draw latch. While it's possible to use the VL-200 without this keeper, sometimes it just makes life easier. You'll need to bring your own screws/rivets/bolts to the party, because they're not included.
- $1.84
- $1.84
- Unit price
- per
-
Versa Latch Draw Latch with Wire SealThe Versa Latch is a small but very strong draw latch designed for years of rugged use in demanding applications, indoors and outdoors. This version of the Versa Latch has an integrated wire seal option for doors/hatches/access panels that, while they can be opened...
- $16.99
- $16.99
- Unit price
- per
-
Universal Compartment LatchThis compact compartment latch has auniversal design with 180Ì_ÌÇ__?̻?ÊÌ___?۪?Ì_ÌÇ__ rotationof the cam. This eliminates the need for differentiating between right and left-hand latches. The cam has a 5/16" square through-hole and can be adapted for use with anyT- or L- Handle with that size...
- $9.31
- $9.31
- Unit price
- per
-
Universal Cabinet LatchThese remarkably simple latches are ideal for small compartments or access panels that require infrequent use. To install, just drill a round hole (see the drawing for dimensions), press on the retainer and adjust the cam as needed. Tighten the set screw, and that's...
- $15.86
- $15.86
- Unit price
- per
-
Trailer Entry Door LatchIf you own an RV, motor home or cargo trailer, you've probably seen a version of this latch. Unlike many of the door latches we supply here, this one is designed to be operated from inside the door as well as the outside! Designed for...
- From $61.22
- From $61.22
- Unit price
- per
-
Toolbox Draw Latch - Adjustable PlasticWhat a marvel of technology! When this latch came out decades ago, we instantly new that time travel was possible. Obviously this came from the future! The Southco E8 draw latch has a maximum working load of 350 lbs, and is adjustable up to...
- $36.92
- $36.92
- Unit price
- per
-
Thumb LatchThis thumb latch assembly with built-in switch box is designed for use with the Manual Control Handlefor bus doors. It can be wired for up to 4 connections such as lights, stop signs or other accessories you might need in your bus (or zombie...
- $19.99
$49.99- $19.99
- Unit price
- per
-
T-Bar Cam LatchThis T-Bar handle latch is comfortable for gloved hands (for winter use) and strong enough for the most demanding environments. All of the necessary mounting hardware is included, and all you need is three round holes. Why three? This prevents the latch from spinning...
- $49.97
$45.99- $49.97
- Unit price
- per
-
Super Heavy Duty Draw LatchThis latch is beyond heavy duty. With 8,000 lbs of pulling capacity, you might use this to hold the lid of a volcano in place, or something equally massive. Measuring at just over 14 inches, this beast defies description. It's big. Really big. HUGE....
- $239.00
- $239.00
- Unit price
- per
-
Standard Roto Lock LatchThese rotary cam latches have an insanely high tensile load rating, and are great for attaching panels together end-to-end. They can be mortised in or attached to the side of a panel, whichever works best for you. With an average load rating of 1400...
- $21.99
- $21.99
- Unit price
- per
-
Stainless Steel E3 Vise Action Compression LatchSouthco's E3 Vise Action compression latches are like a door latch and a clamp all in one! TheSouthco E3'snot only hold a compartment door closed, they clamp it closed with up to 4mm of compression, with a simple 180 degree turn of the wing handle....
- $75.78
- $75.78
- Unit price
- per
-
Spring Loaded K3 Link Lock draw latchThe K3 Link Lock, also known as a "butterfly latch" has a small form factor, but holds a surprising amount of strength. Measuring only 1.5" across the wing, this compact little latch is great on smaller lids or cases.This version of the Link Lock...
- $22.71
- $22.71
- Unit price
- per
-
Southco M1-44 Locking flush-pull latchSouthco M1-44 Low Profile, Medium Series Flush Pull Latch, Black, Locking. Designed for Grip Range of 25mm-26mm and a Panel Thickness of 17mm-22mm. Mounting bracket and screws are included.
- $44.01
- $44.01
- Unit price
- per
-
Snap-In Grabber LatchSouthco's Snap-In Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to...
- $12.29
- $12.29
- Unit price
- per
-
Small Size Southco Flush (Cup) LatchSmall Series Cam Latch, Cup Style, Black finish. This latch turns counter-clockwise to latch, and when the latch is in the locked position, the latch handle is parallel to the edge of the door. This latch has a grip range of 0" to 1/2"...
- $55.84
- $55.84
- Unit price
- per
-
Small Series Southco Flush (Cup) LatchSmall Series Cam Latch, Cup Style, Black finish. Turn this latch counter-clockwise to latch, so that when the latch is in the locked position, the latch handle is perpendicular to the edge of the door. This latch has a grip range of 0" to...
- $55.84
- $55.84
- Unit price
- per
-
Small Adjustable Padlocking Draw Latch for Toolboxes and EnclosuresLooking for an exceptionally strong yet adjustable draw latch? The 412 Series draw latch feature a welded loop on a threaded rod that's strong and easily adjustable. There's even a padlock eye for added security! When adjusted to its maximum length, this latch measures approximately 3.5"...
- From $3.50
- From $3.50
- Unit price
- per
-
Slide Latch, Flush Style**Push-to-Close Slide Latch, Snap-in, Medium Size, for 1.6mm (.060 in) Panel Thickness and 6.4mm (.250 in) Total Grip. Made of ABS, Black.
- $8.52
- $8.52
- Unit price
- per
-
Rear-Mount Roto LockSouthco's Roto Locks are designed for joining panels together at the edges (the technical name for them is 'butt joint panel fasteners'). These latches, once installed, are almost completely hidden! They require only an 8mm hex tool to open and close the latch. These...
- $25.00
- $25.00
- Unit price
- per
-
R4 Series Electronic Rotary LatchEasy to install and maintain, the 1 & 2 Series R4-EM delivers the convenience of electronic access control with the security of a proven, robust, all-metal rotary latch design in a compact, integrated package. Easy push-to-close operation and electronic actuation simplify access across a...
- $186.82
- $186.82
- Unit price
- per
-
Push-Button Actuator for Cable-Operated LocksIf you have a door that uses a rotary stylelock (like most passenger car doors), chances are it's actuated (operated) by cables. This actuator is designed to pull cables in two directions with a simple push.
- $58.98
- $58.98
- Unit price
- per
-
Prong washer for CamlocksInstalling cam locks is easy. Just drill a 3/4" hole with two flat sides on it, and.. oh, wait. You don't have a drill bit that does that? Not to worry! Just drill a3/4" hole, install the prong washer under the head of the...
- $0.59
- $0.59
- Unit price
- per