-
#37 Medium-Sized Flexible Draw LatchThe #37 series draw latches are like mini bungee cords that can never get lost. They're ideal for compartment doors, storage bins, lids, and many other applications. Measures in at 2.94" when latched, this polymer (not rubber) latch is UV resistant, and ideally suited...
- From $24.76
- From $24.76
- Unit price
- per
-
Medium Series Black Snap-In Magnetic CatchSnap-In Magnetic Latch, Medium Series, black housing. 1.1" longx .24" thick. This latch snaps into a frame with a thickness of .020" to .080", and has a breakaway rating of 1.8 lbf. Also makes a great fridge magnet!
- $8.71
- $8.71
- Unit price
- per
-
Large Series Snap-In Magnetic Catch, blackSouthco Snap-In Magnetic Latch, Large Series, black housing,2.57" long x .37" thick. The housing of this latch snaps easily into a frame, thanks to the self-adjusting springs on the ends of the housing. These magnets havea breakaway rating of 11 lbf. They also make...
- $11.61
- $11.61
- Unit price
- per
-
E3 Vise Action Compression Latch, 3 hole mounting styleThis version of Southco's popular E3 Vise Action Compression latch requires three mounting holes to install. These would be most often seen on RVs and tent trailers that have slide-out compartments and are used to secure the slide-out during transport. Available by special order,...
- $77.62
- $77.62
- Unit price
- per
-
Stainless Steel Strap HingeIf you need a rock-solid hinge for a heavy door, this 100% Stainless Steel strap hinge might just be the answer. 8" on the long end, this hinge is ready to be installed... whether it's welded or bolted (mounting hardware not supplied), this hinge...
- $39.63
- $39.63
- Unit price
- per
-
CR-2041-CR-ZNThe 2041 Series Draw Latch is a simple and easy to use draw latch that provides strength and forgiveness for misaligned panels. It requires only two rivets, screws or bolts to install (not included), and requires no adjustment or calibration. Its zinc plating is...
- $4.59
- $4.59
- Unit price
- per
-
E3-12-1 KeyThis key is for the Southco E3 Vise-Action Latch or E5 series Quad Latches with the Bellcore 216 Head style. Made of die-cast zinc and chrome plated for protection!
- $17.22
- $17.22
- Unit price
- per
-
E3-7-1 KeyThis key is for the Southco E3 Vise-Action Latch or E5 series Quad Latches with the 8mm Triangle Head style. This key may fit other triangle actuators, but it's designed specifically for the Southco version. Made of die-cast zinc and chrome plated for protection!
- $17.22
- $17.22
- Unit price
- per
-
3607 Series SlideShelving units, bulk storage bins, trays, or wide storage drawers in commercial or residential settings. Lock-out with lever disconnect. Sold In pairs Load Rating: 200 lbs. Full extension .75" [19.1 mm] side space Drawers up to 42" [1067 mm] wide Lock-out Lever disconnect Clear...
- From $65.54
$157.00- From $65.54
- Unit price
- per
-
3601 Series SlideHeavy-duty capacity for utility and industrial truck bodies, machine tools, and mechanical devices. This slide actually extends 1" farther than it's closed length! Tricky! Sold in Pairs Load Rating: 255 lbs. 1" [25.4 mm] over travel .75" [12.7 mm] side space Non-disconnect Clear zinc...
- $61.76
- $61.76
- Unit price
- per
-
3307 Series SlideFor use in medium-duty industrial drawers or trays, or electronic applications. Over travel and latch disconnect. Sold in pairs Load Rating: 150 lbs. 1" [25.4 mm] over travel .50" [12.7 mm] side space Latch disconnect Clear zinc finish Check out our blog post on...
- From $51.74
$90.34- From $51.74
- Unit price
- per
-
VL-200 Keeper W/.218 HolesWhat makes this particular keeper handy is that it has the same size holes as the Versa Latch (V2-0025-XX or V2-0026-XX).
- From $3.64
- From $3.64
- Unit price
- per
-
Versa-Latch Pad-Lockable Draw LatchNeed security and strength? You can have the best of both! These super-strong draw latches are easy to install. They're also very forgiving! The integral springs allow the latch to close even if your panels aren't perfectly aligned.
- $19.21
- $19.21
- Unit price
- per
-
Flexible Black Rubber Draw LatchYou've probably seen these on ski-doos, ATV's, Sea-Doos or other off-road vehicles. These handsome little draw latches are made of a flexible engineered polymer that resists the sun's harmful UV rays, and provides a firm but positive hold on your lid, cowling, cover or...
- $37.00
- $37.00
- Unit price
- per
-
Zinc Plated Chest Handle90 degree case handle, Zinc plated.Ê The handle has a 90 degree stop for easy lifting without hurting your hands.Ê Easy to install, and ready to use. Mounting screws not included.
- $4.19
- $4.19
- Unit price
- per
-
B8-66-3 Grab HandleFor once, the hardware is included! This handle is molded out of the finest ABS material, and shaped to fit your hand (even in mitts!) very comfortably. Large enough for even the largest of hands, this handle is stylish and available in jet black.
- $19.47
- $19.47
- Unit price
- per
-
B8-63-3-P Plastic Grab HandleABS Grab Handles from Southco. Front Mount, comes with a snap-in cover to hide the mounting hardware (mounting hardware not supplied).
- $28.51
- $28.51
- Unit price
- per
-
Plastic Grab HandleGrab Handle, Black, Flammability rated to UL94-HB. Mounting screws not included. Awesomeness and industrial "chic" are always included.
- $17.76
- $17.76
- Unit price
- per
-
B4-50-303-11Southco Pull, Large series, Clear anodized finish. Need we say more?
- $28.69
- $28.69
- Unit price
- per
-
B4-10-403-12The Southco B4 pulls are lightweight, but incredibly strong. With threaded holes for 8-32 screws (not included) these handles can be installed quickly, but will last for a long, long time.
- $29.77
- $29.77
- Unit price
- per
-
B4-10-203-11The Southco B4 pulls are fancy! These industrial grade aluminum pulls come ina Clear Anodized finish.They even look good enough to put in your kitchen! With threaded holes for 8-32 screws (not included), these pull can be installed in minutes, but will last for...
- $28.00
- $28.00
- Unit price
- per
-
AL-3514-0832-29Aluminum Handle, black matte powder coated with 8-32 threaded mounting holes. This handle has an almost 5" inside grip, and is 1 1/2" tall, providing generous grip area for hands, even with gloves! Mounting holes are exactly 5" apart.
- $20.60
- $20.60
- Unit price
- per
-
Spring Loaded K3 Link Lock draw latchThe K3 Link Lock, also known as a "butterfly latch" has a small form factor, but holds a surprising amount of strength. Measuring only 1.5" across the wing, this compact little latch is great on smaller lids or cases.This version of the Link Lock...
- $26.12
- $26.12
- Unit price
- per
- Choosing a selection results in a full page refresh.