-
Vendor: Southco IncThis isn't your average, everyday hinge. Not only does this hinge hold your door (or lid) firmly closed, italso holds it firmly open at 150 degrees! I know what you're thinking. That's not possible. It IS possible, thanks to science. This handsome hinge also comes...
- $36.36
- $36.36
- Unit price
- per
-
Vendor: Southco IncThis isn't your average, everyday hinge. Not only does this hinge hold your door (or lid) firmly closed, italso holds it firmly open at 115 degrees! I know what you're thinking. That's not possible. It IS possible, thanks to science. This handsome hinge also comes...
- $36.36
- $36.36
- Unit price
- per
-
Vendor: Southco IncWhat a marvel of technology! When this latch came out decades ago, we instantly new that time travel was possible. Obviously this came from the future! The Southco E8 draw latch has a maximum working load of 350 lbs, and is adjustable up to...
- $36.92
- $36.92
- Unit price
- per
-
Vendor: Southco IncThese plastic hinges are more than just plastic hinges. The adjustment screw on the top of the hinge adjusts the tension around the pin, allowing the hinge to either move freely, or only when needed. This hinge can be used to hold a door...
- $15.73
$19.99- $15.73
- Unit price
- per
-
Vendor: Southco IncSouthco's Snap-In Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to...
- $12.29
- $12.29
- Unit price
- per
-
Vendor: Southco IncThese plastic hole plugs are perfect for hiding screws (or holes you made by mistake). These will fit perfectly in a 0.5" hole. Sold in packages of 10.
- $7.99
- $7.99
- Unit price
- per
-
Vendor: Southco IncThese handy little fasteners can be found on many removable panels where "relatively easy" access is required. They require a tool like a screwdriver or a coin to open them. These are found on many RV's, trailers and motorhomes (on the exterior refrigerator access...
- $8.99
- $8.99
- Unit price
- per
-
Vendor: Micro Plastics8" long, 0.126" wide, natural white cable ties are excellent for bundling small cables, wires, and much more. Need to tie your tomato plants to a stake to make them stand tall? Need to tidy up cables on your workstation to keep it neat...
- $1.99
- $1.99
- Unit price
- per
-
Vendor: Micro PlasticsNylon Drive Rivets are easier to install than pop rivets! Just drill a 1/4" hole through your panel and into the substrate (can be hollow or solid!), insert the rivet and hit the pin with a hammer. The pin drives into the body of...
- $344.85
- $344.85
- Unit price
- per
-
Vendor: Eberhard HardwareThe Eclipse Series paddle latch is a plastic slam latch designed for use in harsh or high moisture environments. This kit comes with everything you need to install and use the latch, and there's no adjustment or calibration needed! You can use it with...
- $47.00
- $47.00
- Unit price
- per
-
Vendor: Southco IncThese plastic hinges are more than just plastic hinges. The adjustment screw on the top of the hinge adjusts the tension around the pin, allowing the hinge to either move freely, or only when needed. This hinge can be used to hold a door...
- $15.73
$19.99- $15.73
- Unit price
- per
-
Vendor: Southco IncThis isn't your average, everyday hinge. Not only does this hinge hold your door (or lid) firmly closed, italso holds it firmly open at 150degrees! I know what you're thinking. That's not possible. It IS possible, thanks to science! This handsome hinge also comes...
- $35.16
- $35.16
- Unit price
- per
-
Vendor: Southco IncBeautifully crafted and virtually unnoticeable, this Detent Hinge offers superior door and lid stability with its ability to hold open at 80 degrees and its hidden mounting hardware. It's the perfect mix of form and function, ensuring both a secure and aesthetically pleasing finish...
- $36.36
- $36.36
- Unit price
- per
-
Vendor: Southco IncSouthco's Grabber Latches provide an easy self-closing mechanism that requires no adjustment, no fancy calibration, and no special tools to install. They can be used in cupboards to firmly (yet gently) hold doors closed, but they can also be installed behind drawers to ensure...
- $12.21
- $12.21
- Unit price
- per
-
Vendor: Southco IncThese Pan Headthread-forming screws are designed for use with Southco's nylon #96 series hinges (not the zinc ones), but they can be used with any plastic part that requires installation, but doesn't have threaded holes. Sold in packages of 10pcs.
- $2.50
- $2.50
- Unit price
- per
-
Vendor: Southco IncDzus® Lion Quarter-Turn Retainer, Large Size, Plastic Natural
- $0.19
- $0.19
- Unit price
- per
-
Vendor: Southco IncDZUS® Lion, Washer Nylon Wear Natural
- $0.15
- $0.15
- Unit price
- per
-
Vendor: Southco IncDzus® Lion Quarter-Turn Retainer, Medium Size, Plastic
- $0.15
- $0.15
- Unit price
- per
-
Vendor: Southco IncThis nylon "cup-style" washer is designed for use with Southco's 81 series Dzus quarter-turn fasteners. It fits neatly under the head of the stud and prevents scuffing or scratching on the panel. Available in black! Also, black. Sold in packagesof 100.
- $2.99
- $2.99
- Unit price
- per
-
Vendor: Southco IncSouthco's #81 series push-on retainers are designed for use with their #81 seriesDzusquarter-turn fasteners. Retainers ensure that the studs stay attached to the panel and never get lost. Sold in packages of 100.
- $1.72
- $1.72
- Unit price
- per