-
Vendor: Southco IncMedium Duty Padlock handle, all stainless steel, with 3 threaded mounting studs, 5/16" threadedd shaft. Use this handle with any double or triple-point latching mechanism that accepts a 5/16" square shaft. You can also use a simple (single) pawl for a one-point latching system.
- $39.54
- $39.54
- Unit price
- per
-
Vendor: Ryadon IncThe HM-3000 Stainless Steelhandle is an all-stainless version of the HM-3000-ZN. It'sa very basic and robust L-handle with a built-in padlocking hasp for security. This handle has a 4 1/2" long 5/16" square shaft for actuating a number of possible single or multi-point latches,...
- $47.99
- $47.99
- Unit price
- per
-
Vendor: Steeves AgenciesThe HTD Series hinge is a stamped, all-stainless hinge. There's a nylon bushing in the knuckles to provide smooth, silent operation, and square holes that are ideal for carriage bolt installation. Available in 80mm, 120mm and 200mm lengths. Length is measured from the pin...
- From $6.99
- From $6.99
- Unit price
- per
-
Vendor: Southco IncKeeper plates are made for the K3 series Rotary Draw Latches, but can be used with almost any smaller-sized draw latch. These provide just the right edge for the latch to attach to, creating the perfect union between latch and lid. Available in Stainless...
- From $3.76
- From $3.76
- Unit price
- per
-
Vendor: Southco IncKeeper plates provide a solid attachment point for Southco's K5 series Link Lock latches. Can be riveted, bolted or welded in place. Available in STEEL or STAINLESS. These keepers are designed to work with any of the K5 series latches, but can be adapted...
- From $5.53
- From $5.53
- Unit price
- per
-
-
Vendor: Ludwig Snap FastenersSnap Fasteners are widely used to hold signs on the sides of work trucks, specifically, the sings that say things like "dangerous goods" or "explosive materials on board". They can be riveted or screwed onto any panel and their spring-steel construction does the rest,...
- $2.25
- $2.25
- Unit price
- per
-
Vendor: Southco IncThis Southco Flush Pull Latch provides some compression when the latch is closed. It will compress a gasket and prevent rattling or vibration in the door. It's even got a lock! Made of Stainless Steel, guaranteed to be awesome for a long, long time....
- $135.50
- $135.50
- Unit price
- per
-
Vendor: Southco IncThese amazingly strong magnetic latches were designed for marine use, but can be used any place where you need to hold a door or window open. This latch as a holding force of up to 3.5 KG, and the housings are made of 316...
- $57.19
- $57.19
- Unit price
- per
-
Vendor: Southco IncThis simple little draw latch packs a huge amount of strength! Easy to install and even simpler to operate, this stainless steel latch (made of passivated 304 stainless) is made for the great outdoors. Mounting hardware and keeper are sold separately. Mounting hardware not included.
- $17.35
- $17.35
- Unit price
- per
-
Vendor: SouthcoOffset long pawl for Southco M1 Latch. Includes 1 stainless steel pawl only.
- $20.06
- $20.06
- Unit price
- per
-
Vendor: Southco IncDzus® Lion Quarter-Turn Stud, Medium Size, Slotted Recess, Stainless Steel Passivated
- $2.14
- $2.14
- Unit price
- per
-
Vendor: Suncor StainlessThis link is made from grade 316 stainless steel for maximum corrosion resistance and durability. It is ideal for marine and industrial rigging and linking applications. This link has inside dimensions of 1" x 2", and has a load rating of up to 800...
- $4.40
- $4.40
- Unit price
- per
-
Vendor: Southco IncDZUS® Lion, Retainer Push-on SS
- $1.75
- $1.75
- Unit price
- per
-
Vendor: Southco IncOne of Southco's longest-running products, the Lion (R) quarter-turn stud is easy to use, easy to install and requires no adjustment. It does, however, require some precise calculation, the right receptacle, and a retainer. If you're not sure which part number(s)you need to make...
- $2.30
- $2.30
- Unit price
- per
-
Vendor: Southco IncDzus® Lion Quarter-Turn Stud, Large Size, Slotted Recess, Stainless Steel Passivated
- $2.30
- $2.30
- Unit price
- per
-
Vendor: Steeves AgenciesThis stainless hinge is for doors and access panels where the hinge mechanism is completely hidden behind the scenes!
- $5.99
- $5.99
- Unit price
- per
-
Vendor: Suncor StainlessThe Heavy Duty Butt Hinge is easily installed using #10 fasteners and features a welded pin to prevent from loosening. It is made from grade 316 stainless steel for maximum corrosion resistance and durability. 1.5" wide x 1.5" long, with countersunk holes.
- $18.58
- $18.58
- Unit price
- per
-
Vendor: Steeves Agencies IncThese are most commonly used on semi trailers and industrial equipment where an operator needs to prevent the access door from swinging closed due to wind or gravity. Made of 100% Type 304 Stainless Steel, these holders will give you years of trouble-free service....
- From $5.64
- From $5.64
- Unit price
- per
-
Vendor: Southco IncSouthco's E3 Vise Action compression latches are like a door latch and a clamp all in one! TheSouthco E3'snot only hold a compartment door closed, they clamp it closed with up to 4mm of compression, with a simple 180 degree turn of the wing handle....
- $75.78
- $75.78
- Unit price
- per
-
Vendor: Suncor StainlessThe Heavy Duty Special Eye Bolt features a fully threaded rod welded into an eye nut. It includes 1 nut and washer and is UNC thread. This eye bolt is made from grade 316 stainless steel for durability and corrosion resistance. Ratedto 7,000 lbs!
- $151.99
- $151.99
- Unit price
- per
-
Vendor: Steeves Agencies IncSimple is beautiful! This 13 inch long stainless grab handle is both low-tech and awesome. And shiny. Made from 1/2 inch Type 304 Stainless bar stock, these handles will weather any condition, indoors and out. Mounting holes are countersunk and drilled for 1/4" flat...
- $15.77
- $15.77
- Unit price
- per
-
Vendor: EberhardIf you need a rock-solid hinge for a heavy door, this 100% Stainless Steel strap hinge might just be the answer. 8" on the long end, this hinge is ready to be installed... whether it's welded or bolted (mounting hardware not supplied), this hinge...
- $34.46
- $34.46
- Unit price
- per
-
Vendor: Marlboro Manufacturing IncThese super heavyduty continuous hinges are made of Type 304 Stainless Steel and have a stainless pin. .120" Material thickness, .250" Pin diameter and 1" knuckles. 2" open width and 96" overall length. These hinges have no holes and will have a factory "mill"...
- $179.54
- $179.54
- Unit price
- per
-
Vendor: Suncor StainlessThe Swivel Eye Snap is made from grade 316 stainless steel for maximum corrosion resistance and durability. These stainless steel swivel snaps are ideal for various marine and industrial applications. Rated for loads of up to 200 lbs.
- $9.89
- $9.89
- Unit price
- per