-
E3 Vise Action Compression LatchThis Southco E3 compression latch is made of die-cast zinc! It's a durable material that is ideal for indoor and outdoor applications. With a simple turn of the key, this latch locks a compartment door, then compresses it up to 4mm. That may not...
- $47.24
- $47.24
- Unit price
- per
-
Stainless Steel E3 Vise Action Compression LatchSouthco's E3 Vise Action compression latches are like a door latch and a clamp all in one! TheSouthco E3'snot only hold a compartment door closed, they clamp it closed with up to 4mm of compression, with a simple 180 degree turn of the wing handle....
- $87.15
- $87.15
- Unit price
- per
-
E3-12-1 KeyThis key is for the Southco E3 Vise-Action Latch or E5 series Quad Latches with the Bellcore 216 Head style. Made of die-cast zinc and chrome plated for protection!
- $17.22
- $17.22
- Unit price
- per
-
E3-7-1 KeyThis key is for the Southco E3 Vise-Action Latch or E5 series Quad Latches with the 8mm Triangle Head style. This key may fit other triangle actuators, but it's designed specifically for the Southco version. Made of die-cast zinc and chrome plated for protection!
- $17.22
- $17.22
- Unit price
- per
-
E3-3-1 KeyThis key is for the Southco E3 Vise-Action Latch with the 7mm Triangle Head style. This key may fit other triangle actuators, but it's designed specifically for the Southco version. Made of die-cast zinc and chrome plated for protection!
- $17.22
- $17.22
- Unit price
- per
-
E3-2-1 KeyThis is a "double-bit" key from Southco, used for their specialized E5 series quad panel latches and E3 Series Vise-Action latches. Made of die-cast zinc with a chrome coating for protection, these keys are pretty hard to break, but not impossible to lose!
- $17.22
- $17.22
- Unit price
- per
-
Versa-Latch Pad-Lockable Draw LatchNeed security and strength? You can have the best of both! These super-strong draw latches are easy to install. They're also very forgiving! The integral springs allow the latch to close even if your panels aren't perfectly aligned.
- $19.21
- $19.21
- Unit price
- per
-
Flexible Black Rubber Draw LatchYou've probably seen these on ski-doos, ATV's, Sea-Doos or other off-road vehicles. These handsome little draw latches are made of a flexible engineered polymer that resists the sun's harmful UV rays, and provides a firm but positive hold on your lid, cowling, cover or...
- $37.00
- $37.00
- Unit price
- per
-
P8-128-31-08-11Grab handle, 5", Clear Anodized finish. 8-32 mounting holes for easy installation.
- $27.41
- $27.41
- Unit price
- per
-
P2-52 Pocket PullThe P2 Pocket Pull Flush Handle is a 1-piece handle that installs in minutes. It requires a small cutout, but once installed, is super strong and comfortable handle. Note the panel thickness requirements for this handle (see the picture) for best. If your panel...
- $6.63
- $6.63
- Unit price
- per
-
P2-51 Pocket PullThe P2 Pocket Pull Flush Handle is a 1-piece handle that installs in minutes. It requires a small cutout, but once installed, is super strong and comfortable handle. Note the panel thickness requirements for this handle (see the picture) for best. If your panel...
- $6.63
- $6.63
- Unit price
- per
-
P2-41The P2 Pocket Pull Flush Handle is a 1-piece handle that installs in minutes. It requires a small cutout, but once installed, is super strong and comfortable handle. Note the panel thickness requirements for this handle (see the picture) for best. If your panel...
- $6.20
- $6.20
- Unit price
- per
-
P1-30-103-11 Pocket PullThe P1 Pocket Pull Flush Handle is a 2-piece handle that installs in minutes. It requires a small cutout, but once installed, is a strong, self-contained handle pocket. Mounting screws are included!
- $17.71
- $17.71
- Unit price
- per
-
P1-30-101-11 Pocket PullThe P1 Pocket Pull Flush Handle is a 2-piece handle that installs in minutes. It requires a small cutout, but once installed, is a strong, self-contained handle pocket. Mounting screws are included!
- $13.03
- $13.03
- Unit price
- per
-
-
H945LS2RGZESurface mount Handle. Steel with Zinc plating and Rubber Grip for comfort. Spring loaded to stay down when not in use.
- $8.69
- $8.69
- Unit price
- per
-
H-223-BM-CCWVery basid L-Handle actuator. 1 1/2" mounting hole spacing. Die-case zinc with a chrome finish for nice looks and long life. Comes with two keys.
- $11.00
- $11.00
- Unit price
- per
-
H-1053-ZSurface mount handle, spring loaded to stay down (and out of the way). Mounting hardware not included.
- $6.48
- $6.48
- Unit price
- per
-
EB-47-8062-SSP-9Stainless Steel industrial handle, with padlock eye for maximum security. All Stainless construction. Bolt or weld-on to install. Mounting hardware is not included.
- $32.77
- $32.77
- Unit price
- per
-
B8-66-3 Grab HandleFor once, the hardware is included! This handle is molded out of the finest ABS material, and shaped to fit your hand (even in mitts!) very comfortably. Large enough for even the largest of hands, this handle is stylish and available in jet black.
- $19.47
- $19.47
- Unit price
- per
-
B8-63-3-P Plastic Grab HandleABS Grab Handles from Southco. Front Mount, comes with a snap-in cover to hide the mounting hardware (mounting hardware not supplied).
- $28.51
- $28.51
- Unit price
- per
-
B8-63 HandlesGrab Handle, Front Mount. Made of ABS plastic, these handles come "unassembled" as shown. Just drill your holes (using the handle as your template!), install your mounting bolts, and snap the trim cover into place. VOILA!
- $13.47
- $13.47
- Unit price
- per
-
B8-45 Plastic Grab HandleGrab Handle, rear mount. Easy to install, and sure easy to look at!
- $29.71
- $29.71
- Unit price
- per
-
Plastic Grab HandleGrab Handle, Black, Flammability rated to UL94-HB. Mounting screws not included. Awesomeness and industrial "chic" are always included.
- $17.76
- $17.76
- Unit price
- per
-
B4-50-303-11Southco Pull, Large series, Clear anodized finish. Need we say more?
- $28.69
- $28.69
- Unit price
- per
-
B4-10-403-12The Southco B4 pulls are lightweight, but incredibly strong. With threaded holes for 8-32 screws (not included) these handles can be installed quickly, but will last for a long, long time.
- $29.77
- $29.77
- Unit price
- per
-
B4-10-203-11The Southco B4 pulls are fancy! These industrial grade aluminum pulls come ina Clear Anodized finish.They even look good enough to put in your kitchen! With threaded holes for 8-32 screws (not included), these pull can be installed in minutes, but will last for...
- $28.00
- $28.00
- Unit price
- per
-
AL-3514-0832-29Aluminum Handle, black matte powder coated with 8-32 threaded mounting holes. This handle has an almost 5" inside grip, and is 1 1/2" tall, providing generous grip area for hands, even with gloves! Mounting holes are exactly 5" apart.
- $20.60
- $20.60
- Unit price
- per
-
Spring Loaded K3 Link Lock draw latchThe K3 Link Lock, also known as a "butterfly latch" has a small form factor, but holds a surprising amount of strength. Measuring only 1.5" across the wing, this compact little latch is great on smaller lids or cases.This version of the Link Lock...
- $26.12
- $26.12
- Unit price
- per
- Choosing a selection results in a full page refresh.