-
Rear-Mount Roto LockSouthco's Roto Locks are designed for joining panels together at the edges (the technical name for them is 'butt joint panel fasteners'). These latches, once installed, are almost completely hidden! They require only an 8mm hex tool to open and close the latch. These...
- $28.75
- $28.75
- Unit price
- per
-
K5 Link Lock, Key Lockable, Spring LoadedNeed a super-strong draw latch, but don't like pad-locking it? There's a key-locking version available, and it even has the spring-loaded option included for maximum forgiveness for misaligned panels, vibration and impact. Keepers and mounting hardware are not included.
- $77.96
- $77.96
- Unit price
- per
-
K4 Medium Series Link Lock, Spring LoadedThis medium-sized link lock is quite strong for its size. Featuring a spring-loaded base for impact resistance and a little extra forgiveness if the latch and keeper don't line up perfectly. Steel with zinc plating, mounting hardware sold separately.
- $36.69
- $36.69
- Unit price
- per
-
K3-2403-07 | Link Lock Draw Latch, Small Size, Riveted, Steel, BrightThis small series Southco rotary draw latch is super strong, and has the added benefit of being pad-lockable! Same mounting holes as the standard non-locking versions make this easy to mix and match. Available in steel or stainless steel.
- $28.00
- $28.00
- Unit price
- per
-
CH-2041-CR-ZNThe 2041 Series Draw Latch is a simple and easy to use draw latch that provides strength and forgiveness for misaligned panels. It requires only two rivets, screws or bolts to install (not included), and requires no adjustment or calibration. Its zinc plating is...
- $4.59
- $4.59
- Unit price
- per
-
Toolbox Draw Latch - Adjustable PlasticWhat a marvel of technology! When this latch came out decades ago, we instantly new that time travel was possible. Obviously this came from the future! The Southco E8 draw latch has a maximum working load of 350 lbs, and is adjustable up to...
- $53.16
- $53.16
- Unit price
- per
-
K4 Link Lock Draw Latch, ZincThis is the standard, no-frills medium sized rotary draw latch from Southco. Dependable and strong as well as compact. Just lift the wing, turn it 180 degrees to latch or unlatch, and that's it! Mounting hardware and keeper plates not included.
- $32.84
- $32.84
- Unit price
- per
-
97 Series Draw LatchSouthco's 97 series draw latches are designed for applications that need to be strong and look great. Steel with a Zinc Plating and Bright chromate finish.  Medium-Sized series, Heavy Duty construction. Need a keeper plate for this latch? Check out Part No. 97-57-102-11. Â
- $23.96
- $23.96
- Unit price
- per
-
#37 Large-Sized Flexible Draw LatchThe 37 Series flexible draw latches are made of a space-age polymer (not rubber) that's UV resistant for years of trouble-free service indoors, outdoors, on dry land or on the ocean. Measuring at just over 5" when latched, these bungee-type latches provide an snug...
- $38.74
- $38.74
- Unit price
- per
-
#37 Series Over Center Flexible Draw LatchYou may have seen this holding the hood closed on a Western Star truck, or similar heavy duty application. The 274 series has been discontinued by Southco, but we still have inventory! Made of space-age polymer (not rubber), and UV resistant for years of...
- $125.80
- $125.80
- Unit price
- per
-
#37 Medium-Sized Flexible Draw LatchThe #37 series draw latches are like mini bungee cords that can never get lost. They're ideal for compartment doors, storage bins, lids, and many other applications. Measures in at 2.94" when latched, this polymer (not rubber) latch is UV resistant, and ideally suited...
- From $25.89
- From $25.89
- Unit price
- per
-
#37 Small Series Flexible Draw LatchThese medium-sized flexible draw latches are like permanent 2 3/8" long bungee cords that never get lost! Made of space-age polymer material that looks and feels like rubber (but isn't rubber), these latches are designed for years of use in the great outdoors! Available...
- From $23.60
- From $23.60
- Unit price
- per
-
CH-2270-SS-PL Draw LatchThe CH-2270 draw latch is all stainless, with a plain finish (no coatings or other finishes applied). This wire-bail draw latch is easy to install with just two rivets, screws or bolts. You could even weld it on! Mounting hardware and keepers are not...
- $6.62
- $6.62
- Unit price
- per
-
Spring Loaded K3 Link Lock draw latchThe K3 Link Lock, also known as a "butterfly latch" has a small form factor, but holds a surprising amount of strength. Measuring only 1.5" across the wing, this compact little latch is great on smaller lids or cases.This version of the Link Lock...
- $26.12
- $26.12
- Unit price
- per
- Choosing a selection results in a full page refresh.